PAVERLOC™ SYSTEM

CONCEALED PAVER LOCKING SYSTEM FOR HIGH WIND CONDITIONS

WITHSTANDS WINDS UP TO 250 MPH!

The PaverLoc™ System is engineered for high-wind conditions and features a concealed locking mechanism that delivers a smooth, continuous surface appearance. The system is comprised of three components: the PaverLoc™ Paver, PaverLoc™ Pedestal, and PaverLoc™ Pin. Designed with ease of use in mind, PaverLoc™ is a straightforward, intuitive system that requires no specialized tools or complicated installation steps.
  • Provides wind uplift resistance of -165 psf with no factor of safety
  • Concealed locking system for a smooth, continuous appearance
  • Patented, user-friendly design is simple, intuitive, and easy to work with
  • Quick installation without specialized tools or complicated steps
  • Easy paver removal for roof repairs or replacements
  • Pedestal is made from 90% recycled materials
  • Paver strength is not compromised or altered
  • 2 PaverLoc™ Paver sizes available: 23 1/2" x 23 1/2" and 23 7/8" x 23 7/8" [Paver Size Chart]
  • 2 PaverLoc™ Paver Oversized units available for cutting or perimeters: 23 1/2" x 35 3/8" and 23 7/8" x 35 7/8" [Paver Size Chart]
  • PaverLoc™ is an independent system. It is compatible with Hanover's Elevator® Pedestal System

US and Foreign Patents Apply
Miami Dade County Approval Pending

VIEW TEST DATA & DETAILS
Please Note:
For minor leveling adjustments, 1/16" and 1/8" shims are available. The pedestal locking mechanism must be engaged to ensure proper system performance. DO NOT STACK or CUT PaverLoc™ Pedestals. Restrain and counter-flash all perimeter edges properly. Cut pavers to fit around drains, curbs, and other penetrations. Edge termination is one of the most critical aspects of a properly designed roof wind system. Contact Hanover® regarding options for the proper edge termination for your application.

>>> PaverLoc™ Installation Guideline

  1. TAP the pins into the corner inserts on the bottom of each paver until they are snug with a rubber mallet.
  2. Place the PaverLoc™ Pedestals on top of the Elevator® Top, lining up the larger holes with the center opening.
  3. SET your pavers in place. The pins drop right into the pedestal holes. You will feel a satisfying snap when they are secure.
  4. Finish by inserting a 5/32" Allen wrench into the pedestal's center joint. TURN clockwise and listen for the click – that's your lock engaging!
PaverLoc™ Paver
The PaverLoc™ Paver incorporates an integrated plug on the underside that interlocks with a field-inserted pin. Because the paver remains unaltered from its original manufactured form, its structural integrity is fully maintained. When additional uplift resistance is required, the paver thickness can be increased. Pavers are available in two sizes (and compatible oversized units), Hanover's full range of colors, various textures, and a range of thicknesses.
PaverLoc™ Pin
The field-inserted PaverLoc™ Pin is designed with outer flanges that reinforce the locking connection. Pins must be fully seated into the insert to fully engage the flanges and secure the paver. The pin then sits within the locking mechanism of the PaverLoc™ Pedestal to complete the system connection.
PaverLoc™ Pedestal

The PaverLoc™ Pedestal is designed for simple locking and unlocking, allowing pavers to be easily removed when roof access is required for repairs or replacement. The locking mechanism is engaged with a simple turn utilizing a 5/32” hex wrench. Four glue points have been incorporated if adhering to the No Tab Elevator® Top.

The pedestal can be used on top of the no tab Elevator® top or directly on the roofing system, depending on the required elevation.

Elevator® Top
The PaverLoc™ System is fully compatible with the Elevator® Pedestal System. The PaverLoc™ Pedestal securely snaps onto the no tab Elevator® top. The Elevator® Pedestal System is an adjustable-height solution that accommodates elevations from 2” to 24”. Interchangeable components enable various height configurations, allowing for fine adjustments through simple rotation. Shims are also available for more precise leveling.
Flexible Leveling Shims
Final leveling adjustments can be made with Hanover's flexible Leveling Shims. These shims are rubber-like, preventing paver movement and providing a more solid feel. They will not slide as they eliminate “rigid on rigid” placement. Thicknesses are available in 1/8” (white) or 1/16” (black).

PAVERLOC™ IN ACTION

PaverLoc™ is Hanover’s newest solution designed to stand up to high-wind conditions. See how it works straight from our team. We were proud to debut PaverLoc™ at IIBEC, giving attendees a first look at Hanover’s newest innovation.

Want to experience it firsthand? Visit us at an upcoming event to see live demonstrations or request a sample to evaluate its performance for your next project.

>>> Frequently Asked Questions

RELATED RESOURCES

1450 | PaverLoc™ Test Report

1451 | PaverLoc™ Pedestal and Pin

1452 | Leveling Plates

1453 | PaverLoc™ Paver 23.5 x 23.5

1460 | PaverLoc™ System Drain Detail

View Technical Info >>>

RELATED PRODUCTS

Guardian® Paver System

Roof & Plaza Pavers

Green Roofs

Ballast Pavers

Ventloc

Pedestal Systems

SAMPLE REQUEST

Request a sample to help us find the perfect solution for your project of distinction.

LITERATURE REQUEST

Request our Digital Literature and join our Mailing List to stay up-to-date on our newest product lines.

TECHNICAL INFO

Download our installation details, test results, safety data sheets, and more.